Aspire Replacement Pods
Spares for Aspire's pod kits — Gotek X replacement pods cover the current Gotek range, Loomix has its own 2-pack, and the Flexus Pro takes either a prefilled or empty refillable pod depending on what you're after. The Minican Plus, Pixo and Cyber G TG pods cover Aspire's older kits if you've still got one running, and the Cloudflask S gets its own XL replacement pod. Looking for the device instead? See our Aspire pod kits page. Fast UK delivery.
8 products
Filter by(8 products)
Aspire replacement pods at VapeCity
All current Aspire replacement pod options stocked at VapeCity, with resistance options and compatible kits.
| Pod | Resistance options | Compatible kits | Pack | VapeCity price |
|---|---|---|---|---|
| Cloudflask S XL Pod (empty) | Single empty cartridge | Cloudflask S | 1 pod | £3.99 |
| Flexus Pro Empty Pod | Single empty cartridge | Flexus Pro | 1 pod | £3.99 |
| Minican Plus Replacement Pods | Minican-specific | Minican Plus | 2-pack | £14.99 |
| Gotek X Replacement Pods | 0.6Ω (RDL) / 0.8Ω (MTL) | All Gotek X series | 2-pack | £15.99 |
| Cyber G TG Pod 2 Pack | TG-specific | Aspire Cyber G TG | 2-pack | £19.99 |
| Loomix Replacement Pods 2 Pack | Loomix BP coil pods | Loomix | 2-pack | £19.99 |
| Pixo Pods 2 Pack | 0.4Ω (RDL) / 0.6Ω / 1.0Ω (MTL) | Aspire Pixo only | 2-pack | £20.99 |
| Flexus Pro Pod 2 Pack | 0.6Ω / 1.0Ω | Flexus Pro | 2-pack | £21.99 |
Aspire pods are kit-specific. Gotek pods do not fit Pixo or Loomix kits and vice versa. Check your device model before ordering.
Gotek X replacement pods: the most versatile Aspire pod
The Gotek X replacement pods (£15.99 at VapeCity) are the most broadly compatible in the Aspire range, fitting the Gotek X, Gotek X2, Gotek X3, and Gotek Nano. Two resistance options: 0.6Ω for a looser, restricted direct-to-lung draw at around 15-20W, and 0.8Ω for a tighter mouth-to-lung draw at 10-14W. Side-fill design; open the silicone port on the side of the pod, fill, seal. Mesh coil built into the pod, so there is no separate coil to swap.
The right resistance depends primarily on how you vape and which nicotine strength you use. At 0.8Ω MTL with a 20mg nic salt, the draw is tight and the flavour from a nic salt is cleanest. At 0.6Ω RDL the draw opens up; 10mg nic salt or even 6mg freebase in a 50/50 blend works well. Switching between the two without changing kits is one of the practical advantages of the Gotek pod system. Both pods are compatible with all Gotek X series kits.
Pod lifespan varies by e-liquid. Fruit and menthol nic salts produce minimal residue and extend pod life; heavily sweetened dessert flavours leave sucralose deposits on the mesh faster. With standard 20mg fruit nic salt, a Gotek pod typically runs 7 to 14 days of regular vaping before the flavour drops noticeably.
Aspire pod compatibility guide
Gotek pods (0.6 and 0.8Ω): Gotek X, Gotek X2, Gotek X3, Gotek Nano. Pixo pods (0.4, 0.6, 1.0Ω): Aspire Pixo only. Loomix pods (BP coil): Loomix only; not compatible with Gotek kits. Flexus Pro pods (0.6, 1.0Ω): Flexus Pro only. Minican Plus pods: Minican Plus only. Cyber G TG pods: Aspire Cyber G TG only. Cloudflask S XL: Cloudflask S only. Pod families are not interchangeable across different Aspire kit lines.
Pixo, Loomix and Flexus Pro pods: premium pod options
The Pixo 2-pack (£20.99) gives you three resistance choices from one pod format: 0.4Ω for RDL at 20-26W, 0.6Ω for a balanced draw at 15-20W, and 1.0Ω for a tight MTL at 10-13W. Side-fill, 2ml capacity. The 1.0Ω option is the tightest draw available in the Aspire pod range at VapeCity and pairs well with 20mg nic salt at minimum wattage. It is worth being specific: Pixo pods only work in the Pixo kit. They do not cross-fit the Pixo Aura or any other Aspire model.
The Loomix 2-pack (£19.99) uses Aspire's BP coil platform, a different coil architecture from the Gotek mesh pods. BP coils are a push-fit format that Aspire developed for their newer pod lines to improve flavour clarity over the first generation of built-in mesh pods. The Loomix is the only kit at VapeCity that uses this pod format; if you own a Loomix device, these are the only compatible replacement pods in the range.
The Flexus Pro comes in two configurations: a 2-pack of refillable pods with integrated coils (£21.99, in 0.6Ω and 1.0Ω) or individual empty cartridges at £3.99 each. The empty pod option suits vapers who prefer to buy coils separately and fill their own shell. Not all Aspire pod kits offer this empty-shell format; the Cloudflask S also does, at £3.99 per cartridge.
Frequently asked questions
Which Aspire pods fit the Gotek X3?+
The Aspire Gotek X3 uses Gotek X replacement pods, available at VapeCity for £15.99 per pack. These come in 0.6Ω (RDL) and 0.8Ω (MTL). The same Gotek pods also fit the Gotek X, Gotek X2 and Gotek Nano. Pixo and Loomix pods do not fit the Gotek X3.
What is the difference between 0.6Ω and 0.8Ω Gotek pods?+
The 0.6Ω pod produces a looser, more open draw (restricted direct-to-lung) at 15-20W, suited to 10mg nic salt or 50/50 freebase. The 0.8Ω pod gives a tighter mouth-to-lung draw at 10-14W, matched to 20mg nic salt in a 50/50 blend. If you are switching from cigarettes and want the closest equivalent draw, the 0.8Ω is the better starting point.
Can Aspire Loomix pods be used in a Gotek kit?+
No. Loomix pods use Aspire's BP coil platform and have a different physical format to the Gotek pod chassis. They are not cross-compatible. Loomix pods (£19.99 at VapeCity) fit the Loomix kit only. Gotek pods do not fit the Loomix either.
What e-liquid should I use with Aspire Pixo pods?+
For the 1.0Ω pod (MTL at 10-13W): 20mg nic salt in a 50/50 blend. For the 0.6Ω pod (15-20W): 10mg or 20mg nic salt in 50/50. For the 0.4Ω pod (RDL at 20-26W): 10mg nic salt or 3-6mg freebase in 50/50. The Aspire product page advises against high-VG e-liquids above a 50/50 ratio in Pixo pods.
Does this page include Aspire pod kit devices?+
No. This page lists Aspire replacement pod cartridges only. New pod kit devices, including the Gotek X3, Gotek Nano, Loomix and Minican 3 Pro, are listed on our Aspire pod kits page.
Related categories & brands
Frequently asked questions
Can I buy an empty Flexus Pro pod to fill myself?
Yes — the Flexus Pro Empty Pod is sold alongside the prefilled 2-pack, so you can refill with your own e-liquid once you're through the first fill.
Do these pods fit older Aspire kits like the Minican?
The Minican Plus Replacement Pods are made for the Minican Plus specifically — older original Minican kits use a different pod, so check the exact model before ordering.