
by Innokin
No reviews yet — be the firstInnokin Prism T18E Pro clearomizer kit. Includes a pre-fitted 1.7 Ohm coil plus a spare 1.5 Ohm T18E coil, drip tip, and O-ring set. Available in Black, Stainless Steel, Gunmetal, and Rainbow.
Black
Quantity:
Written and fact-checked by the VapeCity team · Updated June 2026
The Innokin Prism T18E Pro is the highest-specification clearomizer in the Prism 18mm range. It ships with a 1.7 Ohm coil pre-fitted to the tank and a spare 1.5 Ohm T18E coil in the box. Having two coil weights included from day one lets you experience both the very tight 1.7 Ohm draw and the slightly looser 1.5 Ohm option without a separate coil purchase. The kit also includes a spare drip tip and a spare O-ring set.
Four colour options are available and all are currently in stock at £51.52: Black, Stainless Steel, Gunmetal, and Rainbow. The Gunmetal finish is exclusive to the T18E Pro within the Prism range and is not available on the T18E or T18 II. The 2ml tank capacity meets UK TRPR regulations for clearomizer tanks. It sits at the top of the wider Innokin tank line and fits the brand’s pen-style Innokin vape kits.
The T18E and T18 II tanks in the Prism range use 1.5 Ohm coils as their primary option. The T18E Pro steps up to 1.7 Ohm as the pre-fitted coil. At 1.7 Ohm, the coil draws more resistance during firing than the 1.5 Ohm, which in practice produces a tighter, more restricted pull at the mouthpiece. The airflow feels closer to a cigarette draw than the 1.5 Ohm option, making the T18E Pro the choice within the Prism 18mm range for vapers who find the 1.5 Ohm draw still slightly too loose.
The 1.7 Ohm coil runs at lower wattage than the 1.5 Ohm. This produces less vapour per draw, which at higher nicotine concentrations is actually the intended behaviour -- the tighter draw and lower vapour volume work together with 20 mg nicotine salt to deliver a satisfying hit that mimics a cigarette without overwhelming nicotine delivery. For smokers making their first transition away from cigarettes, the 1.7 Ohm coil is frequently the most comfortable starting resistance.
When the 1.7 Ohm coil ages, you have the 1.5 Ohm spare already in the kit to compare. Many vapers find after a few weeks of vaping that they are comfortable stepping down to the slightly looser 1.5 Ohm draw, which is a natural progression as you adapt to vaping. The T18E Pro kit accommodates this transition without requiring an additional purchase.
The Prism 18mm range at VapeCity includes the T18E at £42, the T18 II at £45.60, and the T18E Pro at £51.52. All three use an 18mm body and 510 connection, making them compatible with the same class of slim pen-style devices. The differences are in the coil specification, accessory content, and colour range.
The T18E is the entry point with 14 colour options but a minimal kit (tank, coil, O-ring set only). The T18 II adds a magnetic mouthpiece cap and spare drip tip for £45.60 but drops to three colour options. The T18E Pro is the most complete kit with two coils (1.7 Ohm and 1.5 Ohm), spare drip tip, and O-ring set at £51.52. Its colour range is four options including the Gunmetal finish not found elsewhere in the range.
The T18E Pro makes most sense for vapers who want to experiment with coil resistance, who prefer the very tight 1.7 Ohm draw, or who want the Gunmetal finish. For vapers who primarily care about colour choice, the T18E's 14 options at a lower price point is the better value. For those who want the magnetic cap feature, the T18 II is the specific option for that.
The tank arrives with the 1.7 Ohm coil already fitted, so the only real discipline is priming before the first vape. Skip that and the cotton scorches on the opening draw, which is the most common reason a brand-new tank tastes burnt. The same applies the day you swap in the spare 1.5 Ohm coil.
Burnt taste on a fresh coil
It was vaped before the cotton soaked. Drip onto the wicking ports, refill, and rest it five minutes before drawing.
Draw feels too tight
That is the 1.7 Ohm coil doing its job. Swap to the spare 1.5 Ohm coil for a slightly looser pull.
Gurgling or spitback
Usually an overfill or liquid in the central airflow tube. Vape it down a little and keep juice off the chimney when filling.
Leaking around the base
Check the spare O-rings are seated and the tank sections are screwed together snug, not cross-threaded.
The good
The catch
| Tank diameter | 18mm |
|---|---|
| Tank capacity | 2ml |
| Pre-fitted coil | T18E Pro 1.7 Ohm (MTL) |
| Spare coil | T18E 1.5 Ohm (MTL) |
| Colour options | Black, Stainless Steel, Gunmetal, Rainbow (all in stock) |
| Exclusive finish | Gunmetal (not available in T18E or T18 II) |
| Also included | Spare drip tip, spare O-ring set |
| Price | £51.52 per kit |
Sources: Innokin official Prism T18E Pro product information (innokin.com) · UK TRPR 2016 regulations on clearomizer tank capacity (legislation.gov.uk)
| Standard UK delivery2–3 working days | £2.99 |
|---|---|
| Next-day deliveryorder before 3pm, Mon–Fri | £5.99 |
| Orders over £40free standard UK delivery | Free |
Order before 3pm and we dispatch the same working day. Everything ships in plain, discreet packaging from UK stock, and it’s all TPD-compliant.
You have a 14-day right to cancel online orders. Because e-liquids, pods, disposables and pouches are sealed for hygiene, change-of-mind returns are accepted only when the item is unused and in its original, unopened packaging — opened or used products can’t be refunded. Anything faulty, damaged or incorrectly supplied is fully covered under the Consumer Rights Act, return postage on us.
Full details on our returns & refund policy page.
No reviews yet — be the first to review Innokin Prism T18E Pro Tank.

£29.99
inc. VAT

£7.99
inc. VAT

£9.99
inc. VAT

£8.99
inc. VAT

£19.99
inc. VAT

£26.99
inc. VAT

£19.99
inc. VAT

£23.99
inc. VAT

£30.99
inc. VAT

£19.99
inc. VAT