Innokin Endura T22 Pro

The T22 Pro's 3000mAh battery is the single most significant specification improvement over the T22E. The difference between 2200mAh and 3000mAh is not marginal. Under typical moderate-use vaping conditions, the T22 Pro covers two full days between charges for most users. For heavier vapers, it comfortably covers one full day and then some.

The appeal of this capacity is freedom from charging anxiety. With a 2200mAh or smaller battery, a long day out, a travel day, or a late night raises the question of whether you need to carry a charger. The T22 Pro's 3000mAh removes that consideration for the vast majority of situations. Charge it each morning alongside your phone and it will not fail you during the day.

USB-C charging handles the recharge. The T22 Pro does not support fast charging, so a standard 1A adapter fills the 3000mAh battery in approximately three hours from flat, which is comfortable for an overnight charge. The USB-C port is more durable than the micro-USB connections found on older devices, with a reversible connector that eliminates the fumbling associated with directional plugs.

Most Endura devices operate at a fixed wattage. The T22 Pro introduces adjustable output up to 20W, which gives users control over their vaping experience that the T22E and T20S do not provide. Wattage adjustment on the T22 Pro is straightforward rather than technical: a simple button combination cycles through the available output levels.

The 0.8 Ohm E coil in the T22 Pro has a comfortable operating range of roughly 13 to 18 watts. At lower wattage within that range, the vapour is cooler and the draw is slightly more measured. At higher wattage, the vapour temperature rises and the flavour intensity increases. The ability to start at a lower setting and increase it until the draw feels right is a quality-of-life improvement that more experienced vapers will appreciate.

The 20W ceiling also makes the T22 Pro more future-compatible. If Innokin introduces lower-resistance E coil variants that benefit from higher wattage, the T22 Pro can accommodate them. The T22E at fixed 14W would be more restricted.

The T22 Pro's eleven finishes divide into two categories: premium design finishes and standard colours. Standard colours including Matte Black, Brushed Silver, Steel Gray, Ruby Red, Royal Blue, and Rose Gold are clean and professional in appearance. Rose Gold is not available on the T22E or T20S, making it exclusive within the standard Endura colour range at this tier.

The premium design finishes are what make the T22 Pro distinctive. Black Marble and Blue Marble replicate stone textures on the device body with a finish that photographs well and feels noticeably different from plain plastic in hand. The marble finish is applied to the upper section of the device and contrasts with a plain lower body.

Black Spray and Fuchsia Spray use a splattered-paint surface that gives each device a slightly unique pattern, like painted streetwear. Fuchsia Spray is the loudest option in the range, a white base with vivid pink spatter. Rainbow rounds it off with the iridescent shifting finish that has been an Endura staple for years. Any of these makes the T22 Pro a credible gift for someone who vapes and likes a bit of character in the thing they carry all day.

It arrives with a coil fitted, so it is fill-and-go. Soak a fresh coil first, and dial the wattage to taste once it is wicking.