
by Voopoo
No reviews yet — be the firstTwo VooPoo Vinci 2 XL replacement pod bodies. Compatible with the Vinci 2 and Vinci X 2 devices. Supports the full PnP coil range for both DTL and MTL vaping. Suits 50/50 and high VG e-liquids. In stock at £7.50 per 2-pack.
Quantity:
Written and fact-checked by the VapeCity team · Updated June 2026
The VooPoo Vinci 2 Replacement XL Pods are the pod bodies for the VooPoo Vinci 2 and Vinci X 2 devices. The pack contains two pods. These are pod bodies only: PnP coils must be purchased and installed separately. In stock at £7.50 per 2-pack.
Two compatibility features make the Vinci 2 XL pod the most versatile of the VooPoo pods in our range. First, the pod is compatible with two separate devices: the Vinci 2 and the Vinci X 2. Second, it supports the full VooPoo PnP coil range rather than a subset of it, which means you can dial in your preferred draw style and resistance without being constrained to specific coil options. Both DTL and MTL vaping are achievable within the same pod body by swapping coils. Pair an MTL coil with a 50/50 nic salt, or a sub-ohm coil with a higher-VG juice.
Most replacement pod bodies in our range are tied to a single device. The Vinci 3 cartridges fit the Vinci 3. The Argus V1 pods fit the Argus V1. The Vinci 2 XL pod bodies cross two devices: they fit both the VooPoo Vinci 2 and the VooPoo Vinci X 2, which are two separate products in the Vinci line with different output specifications but a shared pod format.
For vapers who own both devices, or who have upgraded from the Vinci 2 to the Vinci X 2, this means a single order of these pod bodies serves both. You do not need to stock separate pod SKUs for each device. The coil you install into the pod body determines the performance level rather than the pod body itself, and the same coil options are available whether the pod is seated in a Vinci 2 or a Vinci X 2.
If you own only one of the two devices, two-device compatibility is still useful as future context: if you later purchase the other Vinci device, your current stock of Vinci 2 XL pods will remain compatible. This is not guaranteed across all device generations in any manufacturer's range, but VooPoo maintains this compatibility across the Vinci 2 and Vinci X 2 specifically.
The Vinci 2 XL pods are noted as suitable for both 50/50 and high VG e-liquids. E-liquid viscosity matters in pod systems because thicker, high VG liquids do not wick through a coil as quickly as thinner 50/50 blends. Using a very thick e-liquid in a pod designed for low-viscosity liquids can result in dry hits when the coil cannot pull e-liquid fast enough to replace what is being vaporised.
The Vinci 2 XL pod body is designed with sufficient wicking capacity to handle both viscosity levels. When using a 50/50 blend with a higher-resistance PnP MTL coil (such as the 0.8 or 1.2 Ohm options), the thinner e-liquid wicks very efficiently and suits frequent draw patterns without supply lag. When using a high VG blend with a sub-ohm PnP DTL coil (such as the 0.3 or 0.45 Ohm options), the pod's wicking structure can draw the thicker liquid at a rate adequate for normal use at those wattage levels.
The practical recommendation is to match your e-liquid type to your intended coil and vaping style. Use 50/50 nicotine salt e-liquids with MTL coils at 18 to 20 mg. Use high VG, low-nicotine e-liquids (0 to 6 mg) with sub-ohm DTL coils. The Vinci 2 XL pod body accommodates both, which makes it a flexible base for trying different configurations without changing the pod body itself.
Because the coil and pod body are separate, the one job that matters is seating a fresh PnP coil and priming it before the first vape. A dry coil fired straight away scorches the cotton, especially on the lower-resistance sub-ohm coils.
Burnt taste on a fresh coil
It was not primed long enough. Drip onto the mesh, refill, and rest it before starting low.
Burnt taste after a week or two
The coil has worn out, sooner on sweet juice. Press in a fresh PnP coil and keep the body.
Flooding or gurgling
Do not overfill, seat the coil firmly, and close the fill port properly.
Leaking from the base
Check the coil is fully seated and the pod body is not cracked or worn; replace the body if it is.
The good
The catch
| Compatible devices | VooPoo Vinci 2, VooPoo Vinci X 2 |
|---|---|
| Pack size | 2 pod bodies |
| Coil system | VooPoo PnP (full range) |
| Vaping styles | DTL and MTL depending on coil choice |
| E-liquid compatibility | 50/50 and high VG |
| Construction | PCTG |
| Coils | Not included (PnP coils sold separately) |
| Price | £7.50 per 2-pack |
Sources: VooPoo official Vinci 2 product information (voopoo.com) · UK TRPR 2016 regulations on refillable pod systems (legislation.gov.uk)
| Standard UK delivery2–3 working days | £2.99 |
|---|---|
| Next-day deliveryorder before 3pm, Mon–Fri | £5.99 |
| Orders over £40free standard UK delivery | Free |
Order before 3pm and we dispatch the same working day. Everything ships in plain, discreet packaging from UK stock, and it’s all TPD-compliant.
You have a 14-day right to cancel online orders. Because e-liquids, pods, disposables and pouches are sealed for hygiene, change-of-mind returns are accepted only when the item is unused and in its original, unopened packaging — opened or used products can’t be refunded. Anything faulty, damaged or incorrectly supplied is fully covered under the Consumer Rights Act, return postage on us.
Full details on our returns & refund policy page.
No reviews yet — be the first to review Voopoo Vinci 2 Replacement XL Pods.

£29.99
inc. VAT

£14.99
inc. VAT

£12.99
inc. VAT

£0.99
inc. VAT

£4.99
inc. VAT

£23.99
inc. VAT

£31.99
inc. VAT

£30.99
inc. VAT

£6.99
inc. VAT

£5.99
inc. VAT