OXVA Xlim EZ Pods
by OXVA
No reviews yet — be the firstOXVA Xlim EZ pods: the current 2ml top-fill Xlim cartridge, three to a pack, in 0.4, 0.6, 0.8 or 1.2ohm. Fits nearly every Xlim device, from the Go to the Pro 2.
0.4 Ohm · 2ml
£10.99sold individually · inc VAT
Quantity:
1
This product is currently unavailable — check back soon.
Free delivery over £40
Same-day dispatch
TPD compliant
Trade support
Written and fact-checked by the VapeCity team · Updated September 2026
What are OXVA Xlim EZ pods?
OXVA Xlim EZ pods are the current generation of refillable Xlim cartridge: a 2ml pod with a built-in mesh coil, a red top-fill port under a flip-up cap, and four resistances from 0.4ohm to 1.2ohm. They come three to a pack, one resistance per pack, and we sell them at £10.99. They fit almost every Xlim pod kit OXVA has made, which is the whole point of them.
The name causes confusion, so to be clear up front: "EZ" is the name of the cartridge, not of a device. There is no Xlim EZ pod kit. OXVA calls it EZ because the top-fill is easier than the side-fill on the original Xlim pods; you lift the cap, fill through the red port, and close it, without pulling the pod out of the device. If an older listing (including, until today, ours) told you these only fit an "Xlim EZ", it was wrong.
Below: which Xlim devices take EZ pods and which cannot run the 0.4, how each resistance vapes, EZ against the V3 pods and the EZ XL, how to fill and prime one, and the honest numbers on pod life and running cost. The full range of OXVA replacement pods is on the hub page.
- The current Xlim cartridge. EZ is the pod, not a device; there is no such thing as an "Xlim EZ kit".
- Red top-fill port under a flip cap. Open, fill, close, without taking the pod out of the device.
- Four resistances: 0.4, 0.6, 0.8 and 1.2ohm. One resistance per pack of three.
- Fits the Xlim Go, Go 2, Pro, Pro 2, SQ Pro, SE and the original Xlim. The 0.4 needs a Pro, Pro 2, SQ Pro, SE 2 or Go.
- OXVA rates each coil for up to about 50ml of e-liquid, which is five 10ml bottles a pod.
- £10.99 for three, which is about £3.66 a pod.
On this page
- Which OXVA Xlim devices do EZ pods fit?
- Xlim EZ pod resistances: 0.4, 0.6, 0.8 or 1.2ohm?
- Xlim EZ vs V3 vs EZ XL pods: which should you buy?
- How to fill and prime an Xlim EZ pod
- How long does an Xlim EZ pod last, and what does it cost to run?
- Xlim EZ pod leaking, burnt or not firing?
- What’s in the kit
- Specifications
- FAQs
Which OXVA Xlim devices do EZ pods fit?
Nearly all of them. The Xlim pod slot has kept the same shape and magnetic contacts across the range, so an EZ cartridge clicks into the same place as the V2 and V3 pods before it. The one caveat is the 0.4ohm, which needs more power than the smallest Xlims can give it.
| Device | EZ pods fit? | 0.4ohm OK? |
|---|---|---|
| Xlim Go | Yes | Yes |
| Xlim Go 2 | Yes | Yes |
| Xlim Pro 2 | Yes | Yes |
| Xlim SQ Pro 2 | Yes | Yes |
| Xlim 3 Ultra | Yes | Yes |
| Xlim Pro, SQ Pro, SE 2, Classic Edition | Yes | Yes |
| Original Xlim, Xlim SE, Xlim SQ | Yes | No, use 0.6ohm and up |
They do not fit OXVA's other pod systems: not the NeXlim, not the VPrime, not the Origin. If the device does not say Xlim on it, these are not the pods. And they are the 2ml UK version; the 3ml standard version OXVA sells abroad is not TPD-legal here. The EZ XL is listed as its own product.
Xlim EZ pod resistances: 0.4, 0.6, 0.8 or 1.2ohm?
One resistance per pack, so choose before you buy. The rule is the usual one: lower resistance means more power, more warmth and more vapour, and it drinks liquid faster. Higher resistance runs cooler and tighter and sips battery and juice.
| Pod | Draw | Liquid | Suits |
|---|---|---|---|
| 0.4ohm | Loose, direct-to-lung, warm | 3 to 6mg freebase, 60/40 or 70/30 | Bigger vapour on a Pro or Go |
| 0.6ohm | Restricted lung, airy | 10mg salt or 6mg freebase | Flavour chasers, RDTL |
| 0.8ohm | Loose mouth-to-lung | 10 to 20mg salt, 50/50 | The default; what most Xlims ship with |
| 1.2ohm | Tight, cigarette-like MTL | 20mg salt, 50/50 | Ex-smokers, longest battery life |
Not sure? Buy the 0.8ohm. It is the resistance most Xlim kits come with, it works with every nic salt we sell, and it forgives a bit of chain-vaping. Go to 1.2 if you want the draw to feel like a cigarette, or down to 0.6 if you want more cloud on a 10mg salt.
Xlim EZ vs V3 vs EZ XL pods: which should you buy?
Three current Xlim cartridges, all refillable, all four resistances, all compatible with the same devices. The differences are fill method and size.
| EZ (this page) | V3 | EZ XL | |
|---|---|---|---|
| Fill | Top, red port under flip cap | Side port, pod out | Top, red port |
| Capacity | 2ml | 2ml | XL version, see its page |
| Resistances | 0.4, 0.6, 0.8, 1.2ohm | 0.4, 0.6, 0.8, 1.2ohm | 0.4, 0.6, 0.8, 1.2ohm |
| Pack | 3 pods | Sold in multi-packs | 3 pods |
| Pick it if | You want the easiest refill | You want the cheapest per pod | You want the EZ fill in the XL cartridge |
The V3 is the workhorse: side-fill, cheaper per pod in bulk, and perfectly good. The EZ is the convenience upgrade: you fill it standing in the device, which means no dribbles down the side and no fiddling with a rubber bung. If you refill on the move, the EZ is worth the small premium.
How to fill and prime an Xlim EZ pod
The top-fill makes it simple; the soak is where people go wrong. A burnt first pull almost always means the pod was vaped before the cotton had drunk.
- 1Lift the flip cap on top of the pod to reveal the red fill port. You can do this with the pod still in the device.
- 2Push the bottle nozzle into the port and fill until the liquid sits just under the top of the window. Do not brim it.
- 3Close the cap firmly until it clicks.
- 4Leave a new pod standing for five minutes so the organic cotton soaks through. Three minutes is plenty on a refill.
- 5Take three or four gentle draws without inhaling before your first proper pull.
How long does an Xlim EZ pod last, and what does it cost to run?
OXVA rates each EZ coil for up to about 50ml of e-liquid in its own testing on the 0.6ohm. In real use that is roughly one to two weeks for a typical vaper, longer on clear fruit and menthol liquids, shorter on thick, sweet desserts that caramelise on the mesh. You will know it is done when the flavour goes flat or faintly burnt with a full pod.
At £10.99 for three, a pack is roughly three to six weeks of pods, so call it £2 to £4 a week plus your e-liquid. A 10ml bottle of salt fills an EZ pod five times. Against a prefilled pod system at £2 or £3 a pod every couple of days, an Xlim on EZ pods runs at well under half the cost.
Two habits stretch it: keep the pod topped up rather than running it dry, and use a 50/50 liquid on the 0.8 and 1.2. Thick 70/30 shortfill is fine in the 0.4 but starves the tighter pods.
Xlim EZ pod leaking, burnt or not firing?
OXVA built four layers of leak protection into the EZ (the fill port seal, the coil top, the base seal and the cotton itself), so leaks are rarer than on the older pods. When things do go wrong, it is usually one of these.
Burnt taste on a new pod
It was not soaked. Fill, wait five minutes, prime with gentle pulls. A pod already burnt through will not recover.
Burnt taste on an old pod
The coil has reached its limit. One to two weeks is normal, less on sweet liquids.
Liquid in the device bay
Overfilled, or the flip cap was not clicked shut. Fill to below the top of the window and close the cap firmly. Wipe the contacts dry.
Gurgling
Usually hard draws flooding the coil. Tap the pod on a tissue with the mouthpiece down and draw more gently.
Device flashes and will not fire
Wipe the two gold contacts on the pod base and reseat it. If it is a 0.4ohm in an original Xlim, SE or SQ, the device cannot run it; use 0.6ohm or higher.
What’s in the kit
- 3 x OXVA Xlim EZ cartridges, 2ml, all one resistance
Specifications
| Type | Refillable Xlim cartridge with built-in mesh coil |
|---|---|
| Capacity | 2ml (UK TPD version) |
| Fill | Top-fill via red port under a flip cap |
| Resistances | 0.4, 0.6, 0.8, 1.2ohm (one per pack) |
| Pack size | 3 pods |
| Rated coil life | Up to about 50ml of e-liquid (OXVA, 0.6ohm) |
| Leak protection | Four-layer: fill port, coil top, base seal, cotton |
| Fits | Xlim Go, Go 2, Pro, Pro 2, SQ Pro, SQ Pro 2, 3 Ultra, SE, SE 2, SQ, original Xlim |
| Not for 0.4ohm | Original Xlim, Xlim SE, Xlim SQ |
| Weight | About 8g a pod |
Sources: OXVA Xlim EZ cartridge (manufacturer specifications) · E-cigarettes: regulations for consumer products (gov.uk)
Frequently asked questions
Is there an OXVA Xlim EZ pod kit?
No. EZ is the name of the cartridge, not a device. The Xlim EZ pod is the current top-fill Xlim cartridge, and it fits the Xlim Go, Go 2, Pro, Pro 2, SQ Pro and most other Xlim kits.
Do Xlim EZ pods fit the Xlim Pro 2?
Yes, including the 0.4ohm. They also fit the Xlim Go, Go 2, Pro, SQ Pro, SQ Pro 2, 3 Ultra, SE 2 and Classic Edition. The original Xlim, SE and SQ take EZ pods too, but not the 0.4ohm.
What is the difference between Xlim EZ and Xlim V3 pods?
The fill. EZ pods fill from the top through a red port under a flip cap, with the pod still in the device. V3 pods fill from the side, so you take the pod out. Both are 2ml, both come in 0.4 to 1.2ohm, and both fit the same devices.
Which Xlim EZ resistance should I buy for nic salts?
The 0.8ohm for most people: a loose mouth-to-lung draw that suits 10mg and 20mg salts. The 1.2ohm gives a tighter, more cigarette-like pull. Keep the 0.4ohm for low-strength freebase.
How many refills does an Xlim EZ pod last?
OXVA rates the coil for about 50ml of e-liquid, which is around 25 fills of the 2ml pod. In practice most people get one to two weeks before the flavour fades, less on very sweet liquids.
Why is my Xlim EZ pod not firing in my original Xlim?
If it is the 0.4ohm, the original Xlim, SE and SQ cannot power it. Use a 0.6, 0.8 or 1.2ohm pod. If it is a higher resistance, wipe the gold contacts on the pod base and reseat it.
Are Xlim EZ pods 2ml or 3ml?
In the UK, 2ml, because TPD rules cap refillable pods at 2ml. OXVA makes a 3ml EZ for other markets; it is not legal to sell here. The EZ XL is sold as a separate product.
Compatible refillable pod kits
These pods drop straight into the refillable kits below. Tap one to add it to your basket.
Single
OXVA Xlim 3 Pod Kit
£28.99
inc. VAT
Single
OXVA XLIM GO 2 Pod Kit
£13.99
inc. VAT
Single
OXVA Xlim Go Lite Pod Kit
£10.99
inc. VAT
Single
OXVA Xlim Pro 2 Pod Kit
£26.99
inc. VAT
Single
OXVA XLIM Pro 2 DNA Pod Kit
£35.99
inc. VAT
Single
OXVA Xlim Pro 3 Pod Kit
£25.99
inc. VAT
Single
OXVA Xlim SQ Pro 2 Pod Kit
£28.99
inc. VAT
Single
Back Soon
OXVA Xlim Pod KitBack Soon
£19.99
inc. VAT
Single
Back Soon
OXVA Xlim Go Pod KitBack Soon
£14.99
inc. VAT
Single
Back Soon
OXVA Xlim Pro Pod Kit Limited EditionBack Soon
£12.99
inc. VAT
Delivery
| Standard UK delivery2–3 working days | £2.99 |
|---|---|
| Next-day deliveryorder before 3pm, Mon–Fri | £5.99 |
| Orders over £40free standard UK delivery | Free |
Order before 3pm and we dispatch the same working day. Everything ships in plain, discreet packaging from UK stock, and it’s all TPD-compliant.
Returns
You have a 14-day right to cancel online orders. Because e-liquids, pods, disposables and pouches are sealed for hygiene, change-of-mind returns are accepted only when the item is unused and in its original, unopened packaging — opened or used products can’t be refunded. Anything faulty, damaged or incorrectly supplied is fully covered under the Consumer Rights Act, return postage on us.
Full details on our returns & refund policy page.
Customer reviews
No reviews yet — be the first to review OXVA Xlim EZ Top Fill Cartridge 2ml Pods 3 Pack.
