OXVA Xlim Pro 3 Pod Kit

The OXVA Xlim Pro 3 refillable pod kit: a 1500mAh vape with a 1.05in HD colour screen, 30W variable power, the Photon chip and adjustable airflow for MTL to RDTL.

Black Carbon

£18.99sold individually · inc VAT

Flavour · 9 options

Quantity:

Free delivery over £200

Same-day dispatch

TPD compliant

Trade support

Written and fact-checked by the VapeCity team · Updated June 2026

What is the OXVA Xlim Pro 3?

The OXVA Xlim Pro 3 is the latest and slickest of the Xlim refillable pods, the line that built OXVA's name. Like the rest of the family it takes the XLIM pod, which you fill with your own juice and which carries an integrated coil, but the Pro 3 dresses it up with a proper 1.05 inch HD colour screen, the new Photon chip and a 1500mAh battery. It is a pod kit that feels a tier above its price, aimed at anyone who wants control and a bit of polish without carrying a full mod.

OXVA Xlim Pro 3 with its 1500mAh battery and HD colour screen

It covers a wide range of styles. Variable power from 5 to 30W and an airflow slider let you set anything from a tight, cigarette-like mouth-to-lung vape on a higher-resistance pod to a warmer, airier restricted direct-lung draw on the 0.6ohm pod. You fire it on a button or simply on the inhale, your choice. It sits in our refillable pod kits as one of the best all-round pods going, a step up from the Xlim Pro 2.

A refillable pod kit: fill it with your own juice, no prefilled pods.
A 1.05 inch HD colour screen, the slickest in the Xlim line.
Variable power from 5 to 30W, tuned by the new Photon chip.
A big 1500mAh battery that fast-charges over USB-C.
Top-fill XLIM pods with UniTech 2.0 mesh, in 0.6 and 0.8ohm.
Adjustable airflow and fire on a button or just the inhale.

On this page

The HD screen, Photon chip and power
XLIM pods and the refill
Airflow, draw and what juice to use
Setting up the Xlim Pro 3
What does the Xlim Pro 3 cost to run?
Common Xlim Pro 3 problems and fixes
Xlim Pro 3 vs the Pro 2 and disposables
What’s in the kit
Specifications
FAQs

The HD screen, Photon chip and power

The headline is the screen. The Pro 3 carries a clear 1.05 inch HD colour display that shows the wattage, the pod resistance, the battery and a puff count at a glance, and it is the nicest screen on any Xlim. Driving it is the new Photon chip, which holds the output steady and fires fast, so the vape feels consistent from a full battery down to the last bit of charge.

You set the power yourself anywhere from 5 to 30W, which is what lets one device cover so many styles. Wind it down on a higher-resistance pod for a cool, tight mouth-to-lung vape, or push it up on the 0.6ohm pod for a warmer, vapier hit. A lock stops it changing in your pocket. It is the kind of control a simple pod does not give you, without the size of a box mod.

OXVA Xlim Pro 3 HD colour screen with variable wattage and adjustable airflow

XLIM pods and the refill

The Pro 3 uses the XLIM V3 pod, which is refillable and top-filling: lift the cap, drip your juice in and close it, no prising the pod out. Each pod has an integrated UniTech 2.0 mesh coil for clean, consistent flavour, and the kit comes with a 0.6ohm pod for a warmer restricted-lung draw and a 0.8ohm pod for a tighter mouth-to-lung style. You just fit the pod that suits the vape you want.

Because it takes the whole XLIM pod family, including the EZ pods, you have a lot of choice and the pods are cheap and easy to restock, which keeps the running cost low. The integrated coil means you replace the pod when the flavour tires rather than rebuilding anything. Fill it with any nic salt for MTL, or a higher-VG shortfill on the 0.6ohm pod for clouds.

OXVA Xlim Pro 3 compatible XLIM pods in 0.6 and 0.8ohm

Airflow, draw and what juice to use

On top of the wattage there is an airflow slider on the side, so you can fine-tune the draw without changing the pod. Slide it shut for a tight mouth-to-lung pull that feels closest to a cigarette, or open it up for a looser, airier restricted direct-lung draw. Paired with the right pod and wattage, that lets the Pro 3 cover both MTL and a lighter RDTL style on one device.

For most people a 50/50 nic salt is the sweet spot, smooth at higher strength and a good match for the 0.8ohm MTL pod. If you run the 0.6ohm pod open and warm for clouds, a higher-VG freebase suits it better. You can also fire it two ways: press the button as you draw, or set it to auto-draw and just inhale like a simpler pod. It is genuinely flexible.

OXVA Xlim Pro 3 MTL and RDTL vaping, pairs best with a 50/50 e-liquid

Setting up the Xlim Pro 3

There is very little to it, and the screen guides the rest. Fill the pod, let it soak, set the power and airflow, and vape. The one habit worth keeping is giving a fresh pod a couple of minutes before the first hard pull so the coil wicks and you avoid a burnt taste.

1Charge the device over USB-C before first use. There is a cable in the box.
2Lift the top cap on the pod, drip your juice into the fill port, and close it.
3Leave a fresh pod two to three minutes to soak so the coil wicks fully.
4Set the wattage and airflow on the screen to suit the pod, then fire on the button or just inhale.

What does the Xlim Pro 3 cost to run?

The kit is £18.99, and after that you only buy pods and juice. XLIM pods are cheap and sold everywhere, and one pod lasts a good while before the coil tires, so the ongoing cost is low. Fill it from a 10ml nic salt for a couple of pounds and a pod-full costs pennies, far below prefilled pods or disposables.

Against a disposable it is no contest: you buy the device once and then only pay for pods and juice, where a bar gets binned every couple of days. You also bin far less, just a small pod now and then rather than a whole device with a battery. It is the same money-saving logic as any refillable pod kit, with a nicer screen and more control than most.

Common Xlim Pro 3 problems and fixes

The Pro 3 is reliable, but a refillable asks a little more than a prefilled bar. Most snags trace to a pod that has not soaked, the airflow or wattage, or a juice that does not suit the pod.

Burnt or dry hit

The coil has not wicked. After filling, leave a fresh pod two to three minutes and prime with gentle pulls, and do not run the wattage too high for the pod resistance.

Gurgle or leaking

Do not overfill past the line, close the cap firmly and store it upright. A few priming pulls clear a flooded coil.

Weak flavour or thin vapour

Open the airflow, nudge the wattage up on the screen, or fit the 0.6ohm pod for more cloud. Check the battery has charge.

Harsh throat hit

Close the airflow, lower the wattage, fit the 0.8ohm MTL pod, or drop to a lower nic strength. Match a salt to the MTL pod.

Xlim Pro 3 vs the Pro 2 and disposables

Within the Xlim line the Pro 3 is the flagship. It adds the bigger 1.05 inch HD colour screen, the new Photon chip and the 1500mAh battery over the Xlim Pro 2, which is still a fine pod but a step back on the screen and the chip. Both are refillable and share XLIM pods, so if you already own Pro 2 pods they carry over. For the slickest, most capable Xlim, the Pro 3 is the one.

Against a disposable it is in a different league on cost, control and waste: you buy it once and then only pay for pods and juice. It is more involved than a sealed pod, but only a little, and the screen makes it easy. For anyone stepping up from disposables or a basic pod into something with proper control, the Xlim Pro 3 is one of the easiest kits to recommend, and it slots in alongside our wider sub-ohm vapes for the looser RDTL style.

The good

A genuine 1.05in HD colour screen, the best in the Xlim line
Variable 5 to 30W on the steady new Photon chip
Refillable XLIM pods with UniTech 2.0 mesh, cheap to restock
Big 1500mAh battery with fast USB-C charging
Airflow slider plus button or auto-draw firing

The catch

A little more involved than a sealed prefilled pod
You refill and swap pods, a small step up
Not built for big sub-ohm clouds like a mod

What’s in the kit

OXVA Xlim Pro 3 device
XLIM V3 0.6ohm and 0.8ohm pods
USB-C charging cable
User guide

Specifications

Type	Refillable pod kit (MTL to restricted DTL)
Battery	1500mAh, USB-C fast charge
Power	5 to 30W variable, Photon chip
Screen	1.05in HD colour display
Pod	XLIM V3, 2ml top-fill, UniTech 2.0 mesh
Coils	0.6ohm and 0.8ohm included; takes the XLIM and EZ pod family
Airflow	Adjustable side slider
Firing	Button or auto-draw

Sources: OXVA Xlim Pro 3 (manufacturer, OXVA) · UK vaping and nicotine guidance (gov.uk)

Frequently asked questions

Is the OXVA Xlim Pro 3 refillable?

Yes. The XLIM pod is empty and you top-fill it with your own e-liquid by lifting the cap. That makes it far cheaper to run than a prefilled or disposable bar, and lets you use any juice you like.

What is the screen on the Xlim Pro 3?

A 1.05 inch HD colour display, the nicest in the Xlim line. It shows the wattage, pod resistance, battery and puff count, and there is a lock so nothing changes in your pocket. The new Photon chip drives it.

What wattage does it run at?

Variable from 5 to 30W, set on the screen. Lower power suits a tight mouth-to-lung vape on the 0.8ohm pod, and more power suits a warmer restricted-lung draw on the 0.6ohm pod.

What pods does the Xlim Pro 3 take?

The XLIM V3 top-fill pods, with a UniTech 2.0 mesh coil. It comes with 0.6ohm and 0.8ohm pods and takes the full XLIM pod family, including the EZ pods, so there is plenty of choice and they are cheap to restock.

How is it different from the Xlim Pro 2?

The Pro 3 adds a bigger 1.05 inch HD colour screen, the new Photon chip and a 1500mAh battery. The Pro 2 is still a good pod but a step back on the screen and chip. Both are refillable and share XLIM pods.

Can it fire on a button or the inhale?

Both. You can press the fire button as you draw, or set it to auto-draw and just inhale like a simpler pod. That, plus the airflow slider, is what makes it suit so many vapers.

Why does my Xlim Pro 3 taste burnt?

Almost always a pod that has not soaked. Fill it, leave a fresh pod two to three minutes and prime with gentle pulls, and keep the wattage within the pod range. Replace a pod that tastes burnt and will not recover.