Elf Bar ELFX Refillable Pod 3 Pack
by Elf Bar
No reviews yet — be the firstElf Bar ELFX refillable pods: top-fill 2ml QUAQ dual-mesh pods for the ELFX and ELFX Mini, in 0.6 and 0.8ohm, with a long-life coil you fill yourself.
0.6 Ohm
£27.99for 5 · inc VAT
Per unit
£5.60
You get
5
Min order
1 pack
Quantity:
1
× 5 units/boxFree delivery over £200
Same-day dispatch
TPD compliant
Trade support
Written and fact-checked by the VapeCity team · Updated June 2026
What are the Elf Bar ELFX pods?
These are the refillable pods that keep an Elf Bar ELFX running. Unlike a prefilled pod, they arrive empty: you fill them from the top with the juice you like, and a single pod takes a lot of refills before it needs replacing. The coil is a QUAQ dual-mesh, two mesh strips sharing the work, which Elf Bar bills as the industry first dual-mesh refillable pod and which is what gives the ELFX its long pod life and clean taste.
They come in two resistances, 0.6 and 0.8ohm, which change how warm and loose the draw is, and they fit both the ELFX and the smaller ELFX Mini. With a 4x anti-leak design and a top-fill cap they are about as fuss-free as a refillable pod gets. They sit in our wider Elf Bar range.
- The refillable pods that keep an Elf Bar ELFX going.
- Top-fill 2ml pods you fill with your own juice, no prying the pod out.
- QUAQ dual-mesh coils for cleaner flavour and roughly twice the life.
- Two resistances, 0.6 and 0.8ohm, to set the warmth and the draw.
- A 4x anti-leak design, so they behave in a pocket or bag.
- Fit both the ELFX and the ELFX Mini.
On this page
Do these fit my ELFX?
Yes, if you run an Elf Bar ELFX or ELFX Mini. The pod is shared across the ELFX series, so these drop into either device. They are the same top-fill, dual-mesh pods the kits ship with, sold on their own as a refill, so you are buying the exact part rather than a copy.
They are specific to the ELFX series and will not fit the closed ELFA, which takes sealed prefilled pods, or other brands like the Vaporesso XROS 5. If your device is an ELFX, these are the right pods.
Which resistance: 0.6 or 0.8ohm?
The number on the pod is its coil resistance, and it sets the character of the vape. The 0.8ohm is the tighter, cooler mouth-to-lung option, the closest to a cigarette draw, and it sips the least juice, so it is the natural pick for a 20mg salt at low power. The 0.6ohm runs a touch warmer and looser, a light restricted-lung draw with a bit more vapour, and it likes a touch more wattage.
The ELFX device adds a 3-level airflow ring, so the same pod can be tightened for a crisp MTL or opened toward RDL. Pair a closed ring with the 0.8ohm for the tightest cigarette-style pull, or open it up on the 0.6ohm for a warmer, airier hit. If you are coming off disposables and want that familiar tight draw, start with the 0.8ohm. The wider ELFX range also includes a 0.4ohm for the loosest, warmest draw, but the two here cover most people, and since the pack mixes both you can switch depending on the day.
Why the dual-mesh pod lasts longer
Most refillable pods run a single mesh coil that cooks and tires after a handful of refills. The ELFX pod runs two mesh strips side by side, which spreads the heat and the wicking across more surface, so each strip works less hard and the flavour stays clean for far longer. Elf Bar quote optimal performance for around the first 25ml of refills and a maximum pod life of up to roughly 100ml, which they put at about 600 percent more than a comparable single-mesh pod.
In plain terms, that means one pod can see you through many bottles of juice before it starts to taste tired, which is the main reason the ELFX is cheap to run. The pod also carries a 4x anti-leak build, with 360-degree sealing, an absorbent polymer layer and a leak-resistant chamber, so all that refilling does not turn into a pocket full of juice. When a pod finally fades or tastes burnt, you swap in a fresh one from the pack.
How to fill and prime an ELFX pod
A fresh pod needs filling and a short soak before its first use, or the coil can scorch dry. The top-fill design keeps it quick, and the anti-leak chamber means you are not fighting spills while you do it.
- 1Lift the stopper on the top of the ELFX pod.
- 2Drip your 50/50 juice in to the 2ml line, then close the stopper firmly.
- 3Drop the pod into the device and leave it three to five minutes to soak.
- 4Take a couple of gentle priming puffs without firing, then vape as normal.
- 5Top up before the pod runs near empty, so the coil never wicks dry.
A burnt or harsh first puff
The coil was not fully wetted. Refill, leave it five minutes, and take slower, softer draws to start.
A gurgle or the odd spit
You may have flooded the pod or pulled too hard. Ease off the draw, and do not overfill past the 2ml line.
Weak or muted flavour
The coil is likely tiring after heavy use. Swap in a fresh pod, and rinse the contacts if they are sticky.
A pod that will not seat
It is likely the wrong family. These fit only the ELFX and ELFX Mini, not the closed ELFA or other brands.
What e-liquid to use
A 50/50 nic salt is the natural fit, smooth and thin enough to wick well: Elf Bar own ELFLIQ, Hayati Pro, MaryLiq or IVG Intense. A freebase 10ml like IVG 50/50 works nicely in the lower-resistance pod, and you can mix a bigger bottle with nic shots. Browse the full nic salt range to find a flavour you can stick with.
Avoid thick, high-VG sub-ohm juice: these are MTL pods and cannot wick a syrupy 70/30, which is the fastest way to dry-burn a coil. Stick to 50/50 and the dual-mesh coil will reward you with a long, clean run. A 20mg salt suits the tight 0.8ohm, while a 10mg or freebase pairs well with the warmer 0.6ohm.
What the pods cost to run
A box is five 3-packs, so fifteen pods, for £27.99 including VAT. That is about £1.87 a pod, and because each pod is rated for up to roughly 100ml of refills before the coil tires, a single pod can carry you through many 10ml bottles. Spread across that much juice, the pod itself works out at pennies, and your real running cost becomes the e-liquid rather than the hardware.
That is the whole case for a refillable like the ELFX over prefilled or disposable vapes. A prefilled pod such as the 4-in-1 is more convenient but ties you to its own flavours and a fixed fill, while these let you run any 50/50 you like and refill for the price of a bottle. If you want the cheapest cost per puff and do not mind a quick top-up, the refillable route wins comfortably.
The good
- Refillable, so any 50/50 e-liquid you like
- Long-life QUAQ dual-mesh coil, up to about 100ml of refills
- Two resistances to tune the draw and warmth
- Top-fill with a 4x anti-leak chamber, easy and tidy
- Fit both the ELFX and ELFX Mini
The catch
- They arrive empty, so you fill and prime them
- Only fit the ELFX series, not the closed ELFA
- A consumable, replaced when the coil finally tires
What’s in the kit
- Elf Bar ELFX refillable pods (5 packs of 3, 15 pods in total)
Specifications
| Type | Refillable top-fill pod |
|---|---|
| Capacity | 2ml |
| Resistances | 0.6ohm and 0.8ohm |
| Coil | QUAQ dual mesh |
| Pod life | Optimal ~25ml, up to about 100ml of refills |
| Anti-leak | 4x: 360-degree sealing + absorbent polymer layer |
| Fits | Elf Bar ELFX and ELFX Mini |
| Pack | 3 pods per pack |
| Best with | 50/50 nic salt or freebase |
Sources: Elf Bar ELFX pods (manufacturer, Elf Bar) · UK nicotine and e-liquid (TPD) rules (gov.uk)
Frequently asked questions
Are the ELFX pods prefilled?
No, they are refillable. They arrive empty and you fill them from the top with your own e-liquid, then prime and vape. Most people use a 50/50 nic salt such as ELFLIQ.
Which resistance should I choose?
For a tight, cigarette-like MTL on a 20mg salt, pick 0.8ohm. The 0.6ohm runs a touch warmer and looser with more vapour. The pack mixes both so you can switch between them.
Which devices do they fit?
The Elf Bar ELFX and the ELFX Mini, which share the same pod. They do not fit the closed ELFA or other brands like the Vaporesso XROS.
How long does a pod last?
Elf Bar rate the QUAQ dual-mesh coil for optimal performance over about the first 25ml of refills and a maximum life of up to roughly 100ml, well above a single-mesh pod.
Why is it called dual mesh?
The pod runs two mesh strips side by side instead of one. That spreads the heat and wicking, so each strip works less hard, the flavour stays cleaner and the pod lasts far longer.
Do they leak?
They are built with a 4x anti-leak design, including 360-degree sealing and an absorbent polymer layer, so with a sensible fill and a primed coil they stay tidy in a pocket or bag.
What e-liquid should I use?
A 50/50 nic salt such as ELFLIQ, Hayati Pro or IVG Intense, or a freebase 10ml in the 0.6ohm pod. Avoid thick high-VG sub-ohm juice, which these MTL pods cannot wick.
How do I prime a new pod?
Fill it to the 2ml line, leave it three to five minutes to soak, then take a few gentle puffs without firing before vaping normally. Priming stops the first puff tasting burnt.
How many pods do I get and what does it cost?
Our ELFX pods ship as five 3-packs, 15 pods in total, for £27.99 inc VAT, about £1.87 a pod. All prices include UK VAT.
The kit these pods fit
No device yet? These pods drop into the prefilled pod kit below — tap it to add to your basket.
Single
Elf Bar ELFX Refillable Pod Kit
£6.99
inc. VAT
Delivery
| Standard UK delivery2–3 working days | £2.99 |
|---|---|
| Next-day deliveryorder before 3pm, Mon–Fri | £5.99 |
| Orders over £200free standard UK delivery | Free |
Order before 3pm and we dispatch the same working day. Everything ships in plain, discreet packaging from UK stock, and it’s all TPD-compliant.
Customer reviews
No reviews yet — be the first to review Elf Bar ELFX Refillable Pod 3 Pack.
