Titan Pro Prefilled Pod Kit

The Titan Pro 15K is built around a two-part pod system: a 2ml prefilled pod and a 10ml refill container that sits below it inside the device. The refill container connects directly to the pod and keeps the liquid level topped up as you vape. In practice, you never see the liquid level in the 2ml pod drop significantly, because the container below is constantly feeding it. The experience from the outside is simply a consistent draw from start to finish, with no change in flavour depth or hit strength until both the container and the pod are exhausted.

This is fundamentally different from how the Titan X handles its refills. The Titan X gives you three separate 5ml capsules that you swap manually when each one runs dry. The Titan Pro 15K removes that manual step; the refill happens invisibly inside the device. The trade-off is slightly less total e-liquid (12ml versus 17ml on the Titan X) but a noticeably higher puff count (15,000 versus 10,000). The increased puff efficiency comes from the mesh coil, which needs less e-liquid to produce the same or better vapour volume compared to a standard wire coil.

When both the 2ml pod and the 10ml container are exhausted, the swap is straightforward. Open the device bay, slide out the spent pod and empty container, remove the new ones from the refill pack, insert the 2ml pod followed by the 10ml container, close the bay and inhale to activate. The whole process takes around thirty seconds. The device requires no cleaning between packs, and there is no e-liquid contact during the swap.

One important note: the Titan Pro 15K kit does not include a USB-C cable in the box. You will need to supply your own, which for most people is the same cable already used for phones, earphones or other devices. The 1000mAh battery charges to a reasonable level quickly, and the LED indicator on the front of the device shows the current battery percentage so you know exactly when to plug in.

Standard vape coils use a coiled wire element to heat the e-liquid. Mesh coils replace that wire with a perforated metal sheet that creates dozens of heating points across a larger surface area. More heating points mean the wick stays evenly saturated and the e-liquid vaporises more uniformly across the whole coil face. The result is flavour that is brighter and more accurate to the listed taste profile, particularly on fruit and menthol options where subtle notes can be lost on a coarser standard coil.

In a prefilled pod context, the mesh coil matters particularly at the end of a pod. With a standard coil, the final few hundred puffs of a pod often taste noticeably harsher as the wick starts to dry out between refills. Mesh coils are better at maintaining consistent wick saturation right up to the end of the e-liquid, which means the last puffs of the Titan Pro 15K are closer in quality to the first ones. This is one reason the Titan Pro 15K achieves a higher puff count per millilitre than the Titan X despite having less total e-liquid in the kit.

The fixed airflow on the Titan Pro 15K is tuned specifically for MTL vaping at the 1000mAh power level the device runs at. Unlike the Titan X, which gives you an adjustable airflow dial, the Titan Pro 15K draws the same way every time. For most people switching from cigarettes this is not a limitation; the fixed draw is close to what a cigarette feels like, which is the whole point. If you want the flexibility to open or close the airflow to taste, the Titan X is the better choice.