Vaporesso Vibe SE 2 Pod Kit
by Vaporesso
No reviews yet — be the firstThe Vaporesso Vibe SE 2 is a budget pod kit with a 1400mAh battery, a dual mesh smart pod switching between ECO (0.8ohm, 15W) and PWR (0.6ohm, 28W) modes, and nine finish options across Leather and Gleaming variants.
Leather Black
£6.99sold individually · inc VAT
Quantity:
1
Free delivery over £40
Same-day dispatch
TPD compliant
Trade support
Written and fact-checked by the VapeCity team · Updated June 2026
What is the Vaporesso Vibe SE 2?
The Vaporesso Vibe SE 2 takes the budget pod kit category up a level with one smart addition: a dual mesh pod that houses two separate mesh coils in a single cartridge. Slot it into ECO mode and the 0.8ohm coil fires at 15W for a tighter mouth-to-lung draw. Switch to PWR mode and the 0.6ohm coil fires at 28W for a warmer, looser vape with more vapour. No pod swap, no coil change.
Backing that up is a 1400mAh battery, a step up from the original Vibe SE, and a finish range that punches well above the £6.99 price tag. The Leather collection wraps the device in a tactile woven cross-hatch texture. The Gleaming collection gives it a smooth metallic shine. Either way, it looks far more considered than a standard budget pod.
- Dual mesh smart pod: ECO 0.8ohm 15W and PWR 0.6ohm 28W in one pod
- 1400mAh battery with USB-C charging
- RGB light indicator for battery and mode status
- 9 finish options: Leather and Gleaming collections
- 2ml refillable pod, TPD compliant
- Auto-draw activation, no fire button
On this page
How does the dual mesh smart pod work?
The Vibe SE 2 ships with a "Dual Mesh Smart Pod": a 2ml cartridge containing two independent mesh coils inside a single housing. The 0.8ohm coil activates in ECO mode at 15W, and the 0.6ohm coil activates in PWR mode at 28W. The device reads which mode is selected and powers the appropriate coil automatically. Nothing about the pod changes; only the circuit the device completes changes.
For vapers, this removes the usual trade-off of choosing a coil resistance at purchase and being locked into one draw style until the pod runs out. If mornings call for a tighter MTL draw and evenings feel better with a looser style, one pod handles both. When the coils are spent, you replace the pod as a whole unit.
The pod itself is a 2ml capacity refillable cartridge, keeping the Vibe SE 2 fully within UK TPD regulations. Fill it with any 50PG/50VG or higher-PG nic salt blend for best results at the 15W ECO setting, or a 50/50 or 60VG/40PG shortfill blend with a nic shot at 28W PWR if you prefer less nicotine concentration with bigger vapour.
ECO mode vs PWR mode: which should you use?
ECO mode runs the 0.8ohm coil at 15W. The draw is tighter and more cigarette-like, making it the natural starting point for anyone crossing over from smoking. The lower wattage also extends battery life, which matters when you are out and have no cable to hand. A higher-PG nic salt at 10mg or 20mg works well here because it carries nicotine effectively at lower vapour volume.
PWR mode runs the 0.6ohm coil at 28W. The draw opens up into a restricted direct lung style: not as tight as ECO, not as loose as a sub-ohm tank, but noticeably warmer and with more vapour per draw. This works well in the evenings when you want a more satisfying vape rather than a quick, efficient nicotine fix. A 50/50 blend or a shortfill topped with a nic shot is better suited here because the higher output produces more vapour per puff.
Most vapers end up using both modes across the day once they find their rhythm with the Vibe SE 2. Because the pod handles both, there is no extra hardware to carry.
Leather and Gleaming: the nine colour options explained
The Vibe SE 2 comes in two distinct finish families across nine options. The choice is not just cosmetic: the two collections have slightly different dimensions because of the material treatment.
The Leather collection (Black, White, Pink, Brown, Grey) applies a tactile cross-hatch embossed texture to the device body, giving it a fabric-like feel in the hand. At 121.1mm tall and 18.1mm at its widest point, it is slightly larger than the Gleaming version. The texture prevents slipping and makes the device look considerably more premium than a standard matte finish.
The Gleaming collection (Gold, Grey, Black, Purple) goes in the opposite direction with a smooth, high-shine metallic or chrome-effect surface. At 120.8mm tall and 17.6mm wide, it is fractionally slimmer and lighter in the hand. The RGB indicator light is more visible against the gleaming surface, which reads as green, red or white depending on battery level and mode.
Both collections use the same internal hardware: same battery, same dual mesh pod, same charging speed. The choice comes down to texture preference and how the device will be used. The Leather finish grips better in the pocket and is more resistant to showing fingerprints; the Gleaming finish makes a stronger visual impression.
Battery, charging and the RGB indicator
The 1400mAh battery is one of the Vibe SE 2's stronger selling points for a £6.99 kit. At ECO mode (15W), most vapers find this comfortably covers a full day without needing to top up. PWR mode at 28W draws the battery faster, but even then the 1400mAh capacity outlasts many budget pod kits that cap out at 800mAh to 1000mAh.
Charging is via USB-C at 5V/1A. The cable is included in the box. Charge time from empty is approximately 80 to 90 minutes at that draw rate. The USB-C port is on the base of the device, keeping the mouthpiece and pod area completely clear.
The RGB light indicator changes colour to show battery status and the active mode. Vaporesso uses a standard three-colour system: green for a full or near-full battery, white for mid range, and red for low battery. The indicator also responds to the ECO/PWR mode selection, giving visible confirmation of which coil is active before you draw. For new vapers, this removes the guesswork about which mode the device is in.
The good
- Dual mesh smart pod gives two draw styles from one pod
- Generous 1400mAh battery for a budget kit
- Premium-feeling Leather and Gleaming finishes for £6.99
- Auto-draw simplicity with a clear RGB indicator
The catch
- Auto-draw only, with no manual wattage control
- PWR mode at 28W drains the battery noticeably faster
- Smart pod is a whole-unit replacement when the coils tire
What’s in the kit
- 1x Vaporesso Vibe SE 2 device body
- 1x Vibe 0.6/0.8ohm Dual Mesh Smart Pod (2ml)
- 1x USB-C charging cable
- 1x User manual and warranty card
Specifications
| Battery | 1400mAh |
|---|---|
| ECO mode | 0.8ohm mesh coil, 15W |
| PWR mode | 0.6ohm mesh coil, 28W |
| Pod capacity | 2ml (TPD compliant) |
| Charging | USB-C 5V/1A (cable included) |
| Display | RGB light indicator |
| Activation | Auto-draw (no fire button) |
| Dimensions (Leather) | 121.1 x 27.1 x 18.1mm |
| Dimensions (Gleaming) | 120.8 x 26.6 x 17.6mm |
| Finishes | Leather (5 colours), Gleaming (4 colours) |
| Price | £6.99 per kit |
Frequently asked questions
What is the difference between ECO and PWR mode on the Vibe SE 2?
ECO mode fires the 0.8ohm coil at 15W for a tighter mouth-to-lung draw, similar to a cigarette pull, with lower power consumption and longer battery life. PWR mode fires the 0.6ohm coil at 28W for a warmer, looser restricted direct lung draw with more vapour per puff. Both coils are contained in a single dual mesh smart pod, so no pod swap is needed to switch modes.
How long does the 1400mAh battery last on the Vibe SE 2?
In ECO mode at 15W, most vapers get a full day from the 1400mAh battery. In PWR mode at 28W, battery life is shorter due to the higher wattage, but the 1400mAh capacity is generous for a kit at this price. Charging via USB-C at 5V/1A takes approximately 80 to 90 minutes from empty.
What is the difference between the Leather and Gleaming versions?
The Leather version has a tactile embossed cross-hatch texture and is available in Black, White, Pink, Brown and Grey. The Gleaming version has a smooth high-shine metallic finish and comes in Gold, Grey, Black and Purple. The Leather version is fractionally larger (121.1mm vs 120.8mm); the internal hardware is identical.
What e-liquid works best with the Vibe SE 2?
For ECO mode at 15W, a higher-PG nic salt (50PG/50VG or 60PG/40VG) at 10mg or 20mg works well: it delivers nicotine efficiently and the thinner consistency wicks cleanly at lower wattage. For PWR mode at 28W, a 50/50 or slightly higher-VG blend provides a fuller, warmer draw. Free-base shortfills with a nic shot also work at 28W if you prefer lower nicotine at higher vapour volume.
Is the Vaporesso Vibe SE 2 TPD compliant?
Yes. The refillable pod holds 2ml, which is the maximum cartridge capacity under UK Tobacco Products Directive regulations. The device is sold as genuine UK stock at VapeCity.
Does the Vibe SE 2 have a fire button?
No. The Vibe SE 2 uses auto-draw activation: it fires when you inhale through the mouthpiece. There is no fire button. The ECO/PWR mode switch is a separate control on the device body.
Delivery
| Standard UK delivery2–3 working days | £2.99 |
|---|---|
| Next-day deliveryorder before 3pm, Mon–Fri | £5.99 |
| Orders over £40free standard UK delivery | Free |
Order before 3pm and we dispatch the same working day. Everything ships in plain, discreet packaging from UK stock, and it’s all TPD-compliant.
Returns
You have a 14-day right to cancel online orders. Because e-liquids, pods, disposables and pouches are sealed for hygiene, change-of-mind returns are accepted only when the item is unused and in its original, unopened packaging — opened or used products can’t be refunded. Anything faulty, damaged or incorrectly supplied is fully covered under the Consumer Rights Act, return postage on us.
Full details on our returns & refund policy page.
Customer reviews
No reviews yet — be the first to review Vaporesso Vibe SE 2 Pod Kit.
