PIXL 8000 Prefilled Pod Kit

The built-in 650mAh lithium battery is sized for a full day of typical vaping before you need to reach for a cable. On standard mode the draw resistance and output sit in a range where a full charge will comfortably outlast two 12ml pod packs for most people. The LED display on the front face gives you a readout rather than a vague colour indicator: you can see at a glance whether you are at full charge, mid-range, or getting low.

Charging is via USB-C, the same cable used for most modern phones and laptops. There is no proprietary connector to keep track of. A standard 5V/1A USB-C adapter brings the battery from empty to full in under an hour. The PIXL 8000 does not need to be fully charged to use it: you can top it up during the day and vape while it charges without any damage to the battery.

Dimensions are 99mm tall, 44mm wide and 23mm deep. That slim profile means it sits flat in a chest pocket or drops into a jeans pocket without creating a notable bulge. The rectangular shape also makes it easy to set down on a desk without it rolling away, which the cylindrical bar-style vapes cannot manage.

The pod that comes with the kit is a 2ml prefilled cartridge. It slots into the top of the device body, locks in place with a soft click, and is ready to vape immediately. The pod contains a mesh coil pre-saturated with 20mg nic salt e-liquid in whichever flavour you chose when ordering. There are no buttons to press or settings to change: inhale on the mouthpiece and the draw-activated sensor fires the coil.

When the 2ml pod runs dry you will notice the flavour fading and the vapour thinning. At that point you open the 10ml refill container included in the box and top the pod back up. The pod has a fill port designed to accept the refill nozzle directly, so the process is quick and clean with no syringes or funnels needed. You can refill the pod multiple times until the 10ml container is empty, at which point you have used all 12ml of e-liquid in the kit. A fresh pod and refill set costs less than a new device, making the ongoing running cost substantially lower than buying single-use bars.

The mesh coil inside each pod is designed to last the full duration of a single refill set. You do not need to replace the coil separately: when the pod starts tasting burnt or muted after multiple refills, that is the signal to swap in a new pod. Replacement pods are available individually or in multipacks from VapeCity as PIXL 8K Prefilled Pods.

The PIXL 8000 range covers 40 flavours grouped across four broad taste profiles. All flavours use the same 20mg nic salt base in a 50/50 VG/PG blend, which is optimised for the low-wattage mesh coil inside the pod and produces a consistent, smooth draw regardless of which flavour you pick. The same recipes carry over into the PIXL Nic Salts bottled e-liquid range, so if you vape the 8000 pod and want to continue that flavour in your own device, there is a direct bottled equivalent.

Hub Bub is the range standout: an unidentified bubblegum blend that the brand keeps deliberately mysterious, with a sweet, complex chew that does not resolve neatly into any single fruit or candy reference. PIXL Dust is a similarly unusual option, described as a mixed-candy medley. Rainbow Rush layers multiple sherbet-candy notes into one flavour. These three tend to attract the most attention from vapers exploring the range.